SaltDogg Part # 3015694 - TGS07, TGS03 Motor Cover. This is the plastic cover housing which covers your spreader's motor on the SaltDogg TGS03 and TGS07 tailgate spreaders. This is located on the bottom of your spreader hopper assembly.
SaltDogg Spreader Part # 3004611 - Spinner (12in Diameter) is used on a few different SaltDogg spreaders including all of the 1400 series spreaders such as the 2 cu yd stainless steel hopper spreaders. Check your specific spreader's manual to see if this is the spinner you need.
With 8 cubic feet capacity, the TGS03 is a tailgate spreader by SnowDogg for commercial use. The TGS03 Salt Spreader can also be purchased with an optional Vibrator, SaltDogg Part # 3020340 to provide an additional benefit and added benefit of no bulking up of your deicing material. SaltDogg TGS03 salt spreaders come equipped with a 12V DC dual shaft gear motor. Allows for bagged salt to easily be spread from 3' - 30' away from the vehicle. Add a optional vibrator for salt sand mix. Wireless control is pre-wired for an optional vibrator. The TGS03 can be installed on 1/2 ton pick ups all the way up to 1 ton trucks can take advantage of the smaller sized spreader in order to enhance your snow and ice removal experience.
SaltDogg Spreader Part # 3018923 - TGS07 and TGS03 Spinner Disc Protector. This is only used on the SaltDogg TGS07 tailgate spreader and the TGS03 tailgate spreaders. This is the bar which surrounds your spinner to help protect it from accidental damage from obstacles.
SaltDogg Spreader Part # 3014462 - Controller Rocker Switch for Power and Vibrator. This is used on the SaltDogg 3006620 controller which is found on spreaders such as the PRO2000, PRO2500, SHPE0750, SHPE1000, SHPE1500, SHPE2000, and more.
SaltDogg Part # 3009323 - TGS06 Tailgate Spreader Flow Gate Assembly. This is used on many of the TGS series spreaders and is located on the spinner assembly. Specifically, this sits directly at the bottom of your spreader hopper assembly and above the 12V DC spreader motor assembly.
SaltDogg Spreader Part # 3017233 - Wire Harness Truck Side Spinner/Auger Connection Repair Kit for SaltDogg Spreaders. This is found on certain SHPE spreaders such as the SHPE2000, SHPE1500, PRO2000 and more. This repair kit is for the vehicle side auger end wiring harness.
SaltDogg Spreader Part # 3020340 - 200 lbs Vibrator Kit for TGS Tailgate Spreaders. Saltdogg Vibrator Kit for TGS03 provides 200 lb of force to provide a smooth, even spread. The vibrator shakes the hopper to break apart clumps so all of the salt or ice melt flows freely. The TGS03 is pre-wired for the vibrator, making installation fast and easy.