SaltDogg Spreader Part # 3008076 – Vibrator, 80 lb. For TGS Series Spreaders$210.88
SaltDogg Spreader Part # 3008076 – Vibrator, 80 lb. For TGS Series Spreaders. Specifically, this vibrator unit can be installed on the SaltDogg TGS02, TGS01B, TGS03, and TGS05B tailgate spreaders.
SaltDogg Spreader Part # 1411000 – 1in Cast Flange Bearing 2-Holed$29.39
SaltDogg Spreader Part # 1411000 – 1in Cast Flange Bearing 2-Holed is found on many different SaltDogg spreaders including the SHPE series and TGS series of spreaders. On most spreaders, this bearing flange can be found directly below the motor clutch assembly.
SaltDogg Spreader Part # FPY031000150 – Clevis Pin 42871 x W/ 5/32 PH, ZN$4.95
SaltDogg Part # FPY031000150 – Clevis Pin 42871 x W/ 5/32 PH, ZN is found on spreaders such as the SaltDogg TGS07 and TGS03 tailgate salt spreaders, along with other TGS and SHPE series spreaders. The pin is 5/16″ x 1-1/2″. On SHPE hopper spreaders such as the SHPE2000, this pin is located within the trough assembly on the auger itself. Ont the TGS series tailgate spreaders, this pin is also located on the auger assembly within the hopper.
SaltDogg Spreader Part # 3015382 – TGS07 Tailgate Spreader Replacement Auger$120.47
100% OEM SaltDogg Salt and Sand Spreader Parts available at low prices and ready to ship to your door including this SaltDogg Spreader Part # 3015382 Auger
SaltDogg Spreader Part # 3035937 – TGS Salt Spreader Power Cable Kit w/ 150 AMP Circuit Breaker$144.30
SaltDogg Spreader Part # 3035937 – TGS Salt Spreader Power Cable Kit w/ 150 AMP Circuit Breaker is used on many of the tailgate salt spreaders from SaltDogg including the TGS06, TGS07, and many more. This is the vehicle side power wiring which includes the ground cable, power cable and circuit breaker.
SaltDogg Spreader Part # 3011864 – TGS Spreader Replacement Variable Speed Controller$299.99
SaltDogg Spreader Part # 3011864 – TGS Spreader Replacement Variable Speed Controller is used on the TGS series tailgate salt spreaders including the TGS01, TGS05, TGS06, TGS07, TGSUVPRO and more. This is the SaltDogg variable speed controller which allows you to control all the features of your salt spreader from the comfort of your cab. This controller kit includes a vibrator switch, blast switch, and variable speed control in order to regulate the amount of material dropped. There is also a power on/off switch and is connected to 12V of power.
SaltDogg Part # 3001379 – Battery Cable Red Positive$10.17
SaltDogg Part # 3001379 – Battery Cable
SaltDogg Part # 3035934 – TGS Spreader Power Wiring Harness$53.91
SaltDogg Part # 3035934 – TGS Spreader Power Wiring Harness is used on the SaltDogg tailgate spreaders TGS series. This is the wiring harness which provides power to components such as the spreader controller. One end of this plugs into the tailgate spreader controller, while the other splits into (2) ends. One end goes to your battery negative, and the other goes to the circuit breaker post.
SaltDogg Part # 3016751 – Stainless Wing Nut 43834$0.94
SaltDogg Part # 3016751 – NUT,WING 43834 SST
SaltDogg Part # 3014994 – Stainless Cotter Pin 1/8in x 1in$2.00
SaltDogg Part # 3014994 – PIN,COTTER,1/8IN X 1IN SST
SaltDogg Spreader Part # 3018773 – TGS07 Baffle Weldment$68.10
SaltDogg Part # 3018773 – TGS07 Baffle Weldment is located on the side of the spreader hopper itself. Specifically, it’s found on the driver’s side of the spreader.
SaltDogg Spreader Part # 3015707 – TGS07, TGS03 Spinner Shield$41.26
SaltDogg Part # 3015707 – TGS07, TGS03 Spinner Shield is located behind the spinner itself. This shield helps keep the deicing material from hitting your material and forces the material to spread out and away from the truck.