SaltDogg Salt Spreaders

SaltDogg Salt Spreaders

SaltDogg Salt Spreaders for sale at low prices including tailgate salt spreaders like the TGS07 or SUV tailgate spreaders for light duty vehicles as well as and hopper spreaders such as the SaltDogg XD2000 or SHPE series spreaders. SaltDogg salt spreaders are the most durable spreader on the market today as well as some of the lowest prices on spreaders around. With over 40 different variants, you’re bound to find the perfect SaltDogg salt spreader for you. When you buy your new SaltDogg salt spreader from SnowplowsPlus, you not only get the largest selection and full lineup of SaltDogg spreaders, but you get our innovation that can’t be found elsewhere. We have a full lineup of wireless controllers which can be pre-installed on your new SaltDogg salt spreader, or existing spreader. This allows you to control your spreader from the palm of your hand without needing to run wiring throughout your truck cab. If you’re in the market for a new tailgate spreader or are looking to upgrade to a larger hopper spreader, you’ve come to the right place. We’ll get that new SaltDogg salt spreader to your door fast and when you need it.

  • SaltDogg Hopper Spreaders .75 to 2 Cubic Yards

    SaltDogg Hopper Spreaders .75 to 2 Cubic Yards

    11 Products

  • SaltDogg In-Bed Liquid Spray Systems

    SaltDogg In-Bed Liquid Spray Systems

    2 Products

  • SaltDogg Mid Size Hopper Spreaders (2.5 to 5.5 Cubic Yards)

    SaltDogg Mid Size Hopper Spreaders (2.5 to 5.5 Cubic Yards)

    15 Products

  • SaltDogg Municipal Size Hopper Spreaders (6 Cu Yd and Up)

    SaltDogg Municipal Size Hopper Spreaders (6 Cu Yd and Up)

    5 Products

  • SaltDogg Replacement Tailgate Speader

    SaltDogg Replacement Tailgate Speader

    4 Products

  • SaltDogg Spreader Pre Wet Systems

    SaltDogg Spreader Pre Wet Systems

    27 Products

  • SaltDogg Tailgate Spreaders

    SaltDogg Tailgate Spreaders

    5 Products

  • SaltDogg Under Tailgate Spreader - Electric

    SaltDogg Under Tailgate Spreader - Electric

    2 Products

  • SaltDogg Under Tailgate Spreader - Hydraulic

    SaltDogg Under Tailgate Spreader - Hydraulic

    4 Products

  • SaltDogg Walk Behind Spreaders

    SaltDogg Walk Behind Spreaders

    5 Products

  • SaltDogg TGS07 Tailgate Spreader Exclusive Wireless Controller Plus Vibrate

    0 out of 5

    With 11 cubic feet capacity, the SaltDogg TGS07 tailgate spreader by SnowDogg for commercial use.  12V DC variable speed motor allows for bulk salt, and salt and sand mix to easily be spread from 3′ – 30′ away from the vehicle. 3/4 ton to 1 ton trucks can take advantage of the SaltDogg TGS07 and put your truck to work in order to enhance your snow and ice removal experience. Make your experience with your new SaltDogg TGS07 spreader even better with a wireless remote control kit from SnowplowsPlus which can’t be found elsewhere. We are your go to place for all things Buyers and SaltDogg including tailgate spreaders like the TGS07.

    $2,299.00 $1,999.00
  • SaltDogg TGS03 8 Cubic Foot Tailgate Spreader Wireless Controller Included

    0 out of 5

    With 8 cubic feet capacity, the TGS03 is a tailgate spreader by SnowDogg for commercial use. The TGS03 Salt Spreader can also be purchased with an optional Vibrator, SaltDogg Part # 3020340 to provide an additional benefit and added benefit of no bulking up of your deicing material. SaltDogg TGS03 salt spreaders come equipped with a 12V DC dual shaft gear motor. Allows for bagged salt to easily be spread from 3′ – 30′ away from the vehicle. Add a optional vibrator for salt sand mix. Wireless control is pre-wired for an optional vibrator. The TGS03 can be installed on 1/2 ton pick ups all the way up to 1 ton trucks can take advantage of the smaller sized spreader in order to enhance your snow and ice removal experience.

    $1,999.00 $1,800.00
  • SaltDogg 2.5 Cubic Yard Gas Stainless Hopper Spreader

    0 out of 5

    A SaltDogg stainless spreader is an investment made to last. The spreader is powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up. Its hopper, which comes outfitted with a top screen and fully welded frame, is made from high quality 304 stainless steel for long lasting corrosion protection. The spreader is equipped with a steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 12 in. wide and has a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control.

    $5,600.00$5,800.00
  • SaltDogg WB101G 1.5 CU FT Walk Behind Spreader Black Powder Coated Frame

    0 out of 5

    Provide your customers with a complete ice management solution this winter with a SaltDogg WB101G Walk Behind Salt Spreader, also known as the SaltDogg WB100B. With an all new design, the WB100B was upgraded to the WB101G this season with the addition of the new enclosed gear box. The SaltDogg WB101G Walk-Behind salt spreaders will take your ice management business to the next level this winter and you’ll be able to throw that bucket full of salt from the back of your truck and replace it with a professional spreader for sale from SnowplowsPlus

    $329.00 $249.00
  • SaltDogg SHPE1000 Poly Electric Drive Hopper Spreader

    0 out of 5

    The SaltDogg SHPE1000 Spreader is the perfect hopper spreader solution for your medium to heavy duty truck. Put the back of your truck to work this winter like your snow plow on the front and start making you and your business extra money with the addition of ice management. With a dual 12V DC direct drive gear motors and a 2-1/2″ diameter stainless steel auger, your spinner assembly on the SaltDogg SHPE1000 as well as vibrator will ensure all of the bulk salt or salt & sand mixture will freely spread up to 5-30 feet away from your truck. Check out SaltDogg SHPE1000 benefits including in depth information as far as prices, dimensions, chute design, capacity and more from SnowplowsPlus.

    $3,450.00$3,599.00
  • SaltDogg TGS05B 10.79 Cubic Foot Tailgate Spreader with Wireless Controller

    0 out of 5

    With 10.79 cubic feet capacity, the SaltDogg TGS05b tailgate spreader by Buyers for commercial use.  Our wireless remote system allows you to be wired into a positive-negative power cable from your truck’s battery to the back of the vehicle. Plug in our system to your power supply and away you go. The SaltDogg TGS05B spreader is powered by a 12V DC variable speed motor allows for bulk salt, and salt and sand mix to easily be spread from 3′ – 30′ away from the vehicle. 1/2 ton all the way up to 1 ton trucks can take advantage of the smaller sized spreader in order to enhance your snow and ice removal experience.

    $1,999.00 $1,800.00
  • SaltDogg TGS02 Tailgate Spreader 4 Cubic Foot

    0 out of 5

    With 3 cubic feet capacity, the SaltDogg TGS02 spreader is a smaller tailgate spreader by SaltDogg for light commercial use. The SaltDogg TGS02 salt spreader comes with a 12V DC variable speed motor and allows for bagged salt to easily be spread from 3′ – 30′ away from the vehicle. SUV’s all the way up to 1 ton trucks can take advantage of the smaller sized spreader in order to enhance your snow and ice removal experience. Check out the rest of the specs of the SaltDogg TGS02 by Buyers.

    $1,499.00 $1,050.00
  • SaltDogg Part # LS7 – 12 VDC Pre-Wet Kit With One 30-Gallon Poly V-Box Mount Reservoirs for 1400 Series S

    0 out of 5

    SaltDogg Part # LS7 – 12 VDC Pre-Wet Kit With One 30-Gallon Poly V-Box Mount Reservoirs for 1400 Series S.

    • Kits contain everything you need to install and run your pre-wet system.
    • Helps salt stick to pavement and melts ice at lower external temperatures.
    • Your choice of electric or hydraulic pump operation.
    • Sturdy poly reservoirs are designed to fit against your SaltDogg spreader.
    • 12V DC-powered pump provides variable spray rate.
    • Corrosion-resistant stainless steel brackets, tie downs and pump enclosures.
    • Buyers Products SaltDogg Pre-Wet Kit for 1400 Series Spreaders enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.
    • The pre-wet kit comes with a 30 gal polymer reservoir specially designed to fit next to your SaltDogg 1400 Series spreader. The corrosion-resistant poly is held in place by included stainless steel brackets and tie downs. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.
    • The LS7 and LS8 pre-wet kits feature a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS8H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller.
    • Kits include a reservoir, pump, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

    Works with the following SaltDogg spreaders:

       1400050SS Series, 1400100SS Series, 1400300SS Series, 1400350SS Series, 1400455SS Series, 1400465SS Series, 1400505SS Series, 1400601SS Series

    Product Common Use: SaltDogg 1400 Series Spreaders, Snow and Ice Control

    $1,660.23
  • SaltDogg Part # LS14 – Pre-Wet Kit for SHPE2000 Spreaders with 60 Gallon Reservoir

    0 out of 5

    SaltDogg Part # LS14 – Pre-Wet Kit for SHPE2000 Spreaders with 60 Gallon Reservoir.

    • Everything you need to install and run your pre-wet system.
    • Helps salt stick to pavement and melt ice at lower ambient temperatures.
    • Low maintenance electric drive.
    • Sturdy corrosion resistant poly reservoir specially designed to fit against your SHPE2000.
    • In-cab controls to easily adjust volume of liquid being applied.
    • Includes tie downs and corrosion resistant stainless steel brackets.
    • The SaltDogg® Pre-Wet Kit for SHPE2000 Series Spreaders improves your deicing capabilities by adding liquid ice-melt to your salt. This helps the salt stick to the pavement, and it lowers the salt’s freezing temperature so it can melt ice at lower temperatures. The end result is a more efficient and effective spreader that saves you time and material.
    • The pre-wet kit comes with a corrosion resistant 60 gal polymer reservoir specially designed to fit next to your SaltDogg SHPE2000 Series spreader. The reservoir is held in place by the included stainless steel brackets and tie downs. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.
    • The system’s 12 VDC electric diaphragm pump is rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to control the volume of liquid being applied to your salt.
    • Kits include a reservoir, pump, in-cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.
    $2,114.64
  • SaltDogg Part # LS13 – Pre-Wet Kit for PRO2000 and PRO2500 Series Spreaders with 60 Gallon Reservoir

    0 out of 5

    SaltDogg Part # LS13 – Pre-Wet Kit for PRO2000 and PRO2500 Series Spreaders with 60 Gallon Reservoir. Everything you need to install and run your pre-wet system. Helps salt stick to pavement and melt ice at lower ambient temperatures. Low maintenance electric drive. Sturdy corrosion resistant poly reservoir specially designed to fit against your SHPE2000. In-cab controls to easily adjust volume of liquid being applied. Includes tie downs and corrosion resistant stainless steel brackets.

    The SaltDogg® Pre-Wet Kit for PRO2000 and PRO2500 Series Spreaders improves your deicing capabilities by adding liquid ice-melt to your salt. This helps the salt stick to the pavement, and it lowers the salt’s freezing temperature so it can melt ice at lower temperatures. The end result is a more efficient and effective spreader that saves you time and material.

    The pre-wet kit comes with a corrosion resistant 60 gal polymer reservoir specially designed to fit next to your SaltDogg PRO2000/PRO2500 Series spreader. The reservoir is held in place by the included stainless steel brackets and tie downs. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.

    The system’s 12 VDC electric diaphragm pump is rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to control the volume of liquid being applied to your salt.

    Kits include a reservoir, pump, in-cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

    Compatible with: SaltDogg PRO2000, PRO2000CH, PRO2500, and PRO2500CH Series Spreaders

     

    $2,093.04
  • SaltDogg Part # LS11H -Hydraulic Pre-Wet Kit With Two 160-Gallon Poly Side Mount Reservoirs

    0 out of 5

    SaltDogg Part # LS11H -Hydraulic Pre-Wet Kit With Two 160-Gallon Poly Side Mount Reservoirs. Buyers Products SaltDogg Pre-Wet Kit for Municipal Dump Spreaders (MDS) enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.

    • Kits contain everything you need to install and run your pre-wet system.
    • Helps salt stick to pavement and melts ice at lower external temperatures.
    • Your choice of electric or hydraulic pump operation.
    • Sturdy poly reservoirs are designed to fit against your SaltDogg MDS Series spreader.
    • 12V DC-powered pump provides variable spray rate.
    • Corrosion-resistant stainless steel brackets, tie downs, and pump enclosures.
    • The pre-wet kit comes with two 160 gal polymer reservoirs specially designed to fit next to your SaltDogg spreader. The corrosion-resistant poly is held in place by included stainless steel brackets. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.
    • The LS11 pre-wet kit features a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS11H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller.
    • Kits include a reservoir, pump, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

    Works with the following spreaders:

       MDS Series

    Product Common Use: SaltDogg MDS Series Municipal Spreaders, Snow and Ice Control

    $7,015.68
  • SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

    0 out of 5

    SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs.

    Buyers Products SaltDogg Pre-Wet Kit for Municipal Dump Spreaders (MDS) enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.

    • Kits contain everything you need to install and run your pre-wet system.
    • Helps salt stick to pavement and melts ice at lower external temperatures.
    • Your choice of electric or hydraulic pump operation.
    • Sturdy poly reservoirs are designed to fit against your SaltDogg MDS Series spreader.
    • 12V DC-powered pump provides variable spray rate.
    • Corrosion-resistant stainless steel brackets, tie downs, and pump enclosures.
    • The pre-wet kit comes with two 160 gal polymer reservoirs specially designed to fit next to your SaltDogg spreader. The corrosion-resistant poly is held in place by included stainless steel brackets. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.
    • The LS11 pre-wet kit features a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS11H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller.
    • Kits include a reservoir, pump, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

    Works with the following spreaders:

       MDS Series

    Product Common Use: SaltDogg MDS Series Municipal Spreaders, Snow and Ice Control

    $5,076.00
You've just added this product to the cart: