The SnowDogg HD/EX Snow Plow is made up of a few vital components that ensure your snow removal experience is smooth with maximum performance. One of those important and vital components on the SnowDogg HD/EX is the plow electrical parts and harnesses. The electrical harness parts on the HD/EX snow plow are made up of repair ends, grill connector caps, truckside control harnesses, controller for the plow itself, and more which are specific to the SnowDogg HD/EX snow plow.
SnowDogg Part # 16160512 – Harness Dust Cap for Lights
SnowDogg Part # 16160512 – Harness Dust Cap for Lights SnowDogg harness cap covers the connector port which attaches to the lights on the side of the plow for your SnowDogg snow plow. This is a very common part and is used on almost all SnowDogg plows. You’ll find this dust cap on the plow side of your truck. Protect your wiring harness from corrosion and moisture from damaging the pins.
SnowDogg Part # 16160620 – Snow Plow Controller Dash Mount Kit
SnowDogg Part # 16160620 – Snow Plow Controller Dash Mount Kit is used to mount your SnowDogg plow controller to your truck’s dashboard. You’ll receive the bracket itself, adhesive, and 4 screws for installation.
SnowDogg Part # 16160510 – Wiring Harness Weather Protect Plug
SnowDogg Part # 16160510 – Wiring Harness Weather Protect Plug is used on SnowDogg plows to help protect your wiring harness from rain, sleet, and snow in order to help protect against corrosion and damage to your electrical components. This cap will work with wiring harnesses 16160100 and 16160300.
SnowDogg Part # 16160402 – Spring Cage Connector, Kit of 2
SnowDogg Part # 16160402 – Spring Cage Connector, Kit of 2 are for your electrical components throughout your SnowDogg Plow. These are found on many of the SnowDogg plows including the XP series, CM plow, MD plows and more.
SnowDogg Part # 16160110 – Connector Repair Kit for Part # 16160100
SnowDogg Part # 16160110 – Connector Repair Kit for Part # 16160100. This is the vehicle side wiring harness repair kit for SnowDogg snow plows. If you have a fray or tear in your wiring harness 16160100, rather than buy a new wiring harness, purchase a repair kit which will solve your problems for half the price.
SnowDogg Part # 16160400 – Plow Side Control Harness
SnowDogg Part # 16160400 – Plow Control Harness is your controller wiring harness on the plow side of your setup. This is the harness which is connected to all of your HPU solenoid coils. One end of the wiring harness will have small coil plugs with different colored wires along with a positive and negative cable. The other side of the cable will have a large mail plug with (2) large pins on the bottom of the plug and smaller pins on the top. This is used on plows such as the SnowDogg EX, HD, TE, MD, and CM snow plows.
SnowDogg Part # 16160114 – Individual Light Relay for 16160100
SnowDogg Part # 16160114 – Individual Light Relay for 16160100 is found on all SnowDogg plow setups. This is the relay which is part of the relay pack on the vehicle side wiring harness. Most plow setups will require (6) total of these relays. This is sold as a single relay and can be used for many other brands of plows as well.
SnowDogg Part # 16160300 – Truck Side Control Harness
SnowDogg Part # 16160300 – Truck Side Control Harness is used on SnowDogg plows such as the XP, VXF, HD, EX, MD plows and more. Check your plow’s manual if you’re unsure if this is the harness you need. The control harness is located on the vehicle side of your plow setup. The end of the harness has a female end with (2) large pinholes and would come out the vehicle’s grille so you can plug and unplug as needed when you use your plow.
SnowDogg Part # 16160610 – Controller Extension Harness
SnowDogg Part # 16160610 – Controller Extension Harness is used on SnowDogg plows such as the MD snow plow. This harness is an extension for your controller and is 36″ in length. You’ll notice the large white plugs at the end of each side of this harness. You’d plug this into your controller on one end, and the other end would plug to your main vehicle side control harness. This allows you to have a bit more wiggle room while plowing instead of being tied to a short cable.
SnowDogg Part # 16160600 – MD, EX, HD Snow Plow Controller
SnowDogg Part # 16160600 – MD, EX, HD Snow Plow Controller is the straight blade controller found on generation 1 SnowDogg straight blade snow plows. This is an OEM straight blade controller and used on SnowDogg plows such as the SnowDogg MD, HD, EX, and TE snow plows. Controller is pre-programmed specifically for use with straight blades. This controller comes with the controller wiring which is 24″ long and comes directly out of the handheld controller itself before it plugs into your main controller harness on the truck. You’ll also receive the controller mounting bracket for installation.
SnowDogg Part # 16160410 – HT300, HV600 HPU Relay Motor Power Unit Solenoid
SnowDogg Part # 16160410 – HT300, HV600 HPU Relay Motor Power Unit Solenoid is used on all SnowDogg plow setups which have the HT300 or HV600 HPU hydraulic units such as the HD, EX, VX, and more. The relay motor solenoid is found on the vehicle side, most commonly under the hood near the battery on your truck. This is the solenoid which sends electrical current throughout your plow’s electrical system as needed. You’ll find wires such as positive, negative, and your control harness connected to this solenoid.
SnowDogg Part # 16160100 – Truck Light Relay Harness
SnowDogg Part # 16160100 – Truck Light Relay Harness is used on SnowDogg plows such as the SnowDogg MD, VMD, HD, EX, TE, XP ,VX, VXF, and CM snow plows. This is the harness which plugs into your vehicle’s lights, or headlight adapter, and has a large relay pack on it, and then exits through your vehicle’s grille. If you need individual relays for your existing harness, check out part number 16160114. This harness will include all new harness already connected on the relay block. This is an OEM part for SnowDogg plows only.