SnowDogg Misc Plow Parts

SnowDogg Misc Plow Parts such as caps, coils, cables, clevis pins, and other common parts you may need to replace on your snowplow along the way. If you can’t find what your looking for here, use our search at the top or reach out via live chat for further help!

  • SnowDogg Part # 16160512 – Harness Dust Cap for Lights

    0 out of 5

    SnowDogg Part # 16160512 – Harness Dust Cap for Lights SnowDogg harness cap covers the connector port which attaches to the lights on the side of the plow for your SnowDogg snow plow. This is a very common part and is used on almost all SnowDogg plows. You’ll find this dust cap on the plow side of your truck. Protect your wiring harness from corrosion and moisture from damaging the pins.

    Earn 0.82 Reward Points
    $8.16
  • SnowDogg Part # 16160510 – Wiring Harness Weather Protect Plug

    0 out of 5

    SnowDogg Part # 16160510 – Wiring Harness Weather Protect Plug is used on SnowDogg plows to help protect your wiring harness from rain, sleet, and snow in order to help protect against corrosion and damage to your electrical components. This cap will work with wiring harnesses 16160100 and 16160300. 

    Earn 0.82 Reward Points
    $8.16
  • SnowDogg Part # 16152100 – HT300 Hydraulic Power Unit Plastic Cover for Straight Blade Plow

    0 out of 5

    SnowDogg Part # 16152100 – HT300 Hydraulic Power Unit Plastic Cover for Straight Blade Plow. If you have an HT300 power pack HPU, this is the plastic cover for you.  This is placed over the HT300 in order to protect from moisture and corrosion.

    Earn 4.08 Reward Points
    $40.80
  • SnowDogg Part # 16160402 – Spring Cage Connector, Kit of 2

    0 out of 5

    SnowDogg Part # 16160402 – Spring Cage Connector, Kit of 2 are for your electrical components throughout your SnowDogg Plow. These are found on many of the SnowDogg plows including the XP series, CM plow, MD plows and more.

    Earn 0.82 Reward Points
    $8.16
  • SnowDogg Part # 16111310 – MD, HD, EX, VX, CM Plow A-Frame Jack

    0 out of 5

    SnowDogg Part # 16111310 – MD, HD, EX, VX, CM Plow A-Frame Jack. This is an OEM jack assembly for your SnowDogg MD, HD, EX, VX, or CM series snow plow. This is the assembly located in between your a-frame assembly and used to hold the plow up when not in use.

    Earn 7.55 Reward Points
    $75.48
  • SnowDogg Part # 16151102 – HT300, HV600 Inlet Strainer With Elbow

    0 out of 5

    SnowDogg Part # 16151102 – HT300, HV600 Inlet Strainer With Elbow is found on all SnowDogg plows with the HT300 or HV600 HPU hydraulic units. Just about every SnowDogg plow will have this inlet strainer kit. This inlet strainer with elbow is located within the hydraulic reservoir assembly and is directly attached to the plow pump.

    Earn 1.22 Reward Points
    $12.24
  • SnowDogg Part # 16111111 – MD, VMD Plow D2TM Pedal Linkage

    0 out of 5

    SnowDogg Part # 16111111 – MD Plow D2TM Pedal Linkage is also found on other SnowDogg plows such as the VMD v-plow and the MUT series UTV plows. This is the pedal lever found on the D2TM linkage on your plow, behind the spring assembly and lock pin. There are two located on your linkage, with one on each side. 

    Earn 3.02 Reward Points
    $30.21
  • SnowDogg Part # 16152120 – Hydraulic Valve Assembly Top Cover

    0 out of 5

    SnowDogg Part # 16152120 – Hydraulic Valve Assembly Top Cover is used on the VXF and VMD v plows from SnowDogg to cover the HPU hydraulic unit on the plow side.  If you have an HV600 HPU unit, this is the cover you’d need. There are (3) parts of the cover including this top cover, and then a drivers side and passenger side front cover sold separately. 

    Earn 3.57 Reward Points
    $35.70
  • SnowDogg Part # 16160410 – HT300, HV600 HPU Relay Motor Power Unit Solenoid

    0 out of 5

    SnowDogg Part # 16160410 – HT300, HV600 HPU Relay Motor Power Unit Solenoid is used on all SnowDogg plow setups which have the HT300 or HV600 HPU hydraulic units such as the HD, EX, VX, and more. The relay motor solenoid is found on the vehicle side, most commonly under the hood near the battery on your truck. This is the solenoid which sends electrical current throughout your plow’s electrical system as needed. You’ll find wires such as positive, negative, and your control harness connected to this solenoid.

    Earn 4.57 Reward Points
    $45.66
  • SnowDogg Part # 16122100 – Blade Guide Kit Pair

    0 out of 5

    SnowDogg Part # 16122100 – Blade Guide Kit Pair is used on SnowDogg plows such as the MD, HD, EX plows and more. These are OEM and are the original blade guides found on your SnowDogg plow when it rolled off the lot. These are orange in color and you’ll receive (2) blade guide poles, and the hardware needed to install onto your plow.

    Earn 2.55 Reward Points
    $25.50
  • SnowDogg Part # 16160310 – Connector Repair Kit For Part # 16160300

    0 out of 5

    SnowDogg Part # 16160310 – Connector Repair Kit For Part # 16160300. This is the repair wiring connector for your SnowDogg 16160300. To install this connector repair kit, you’d remove the existing connector by cleanly cutting ghte harness before the damaged area. Strip the wires on the existing harness. And then properly crimp the wires using the butt connectors preinstalled on the repair harness.

    Earn 14.7 Reward Points
    $147.04
  • SnowDogg Part # 16152342 – S8 Dual Spade HV Coil

    0 out of 5

    SnowDogg Part # 16152342 – S8 Dual Spade HV Coil is located on your HPU unit. This is the S8 coil which is a dual spade connection. Check your plow’s manual to ensure this is the right coil for you.

    Earn 8.14 Reward Points
    $81.37
You've just added this product to the cart: