Wireless Controller Accessories & Parts

wireless remote parts, wireless remote control parts, wireless remotes parts

Wireless Remote Accessories and Parts

Wireless Accessories and other parts including external antennas for the wireless receiver or extra remote sleeves can help you complete the transition to wireless or improve your overall efficiency in multiple ways. Check out our external antenna extension cables which allow you to keep your "line of site" with the unit, even when you have it in an enclosed box within your application or otherwise. From reverse polarity contractors and relays for your wireless application, SnowplowsPlus and ControlAllWireless are here to ensure you transition and conversion from wired to wireless DC applications, is a seamless one.

Wireless remote control transmitter and wireless receiver accessories for wireless salt spreader controllers or any 12v dc wireless application. If you are having issues with spotty connections due to a steel enclosure, try our 2 foot antenna extension which screws into your existing wireless receiver to provide an even better wireless connection extension.

Sealed relay used on Boss, Western, Fisher, Hiniker and more
Find yourself needing a way to have a quick connect and disconnect for your wireless receiver as part of one of our wireless remote controller kits? Buy the Anderson Plug SA50 – 6 Gauge 50 Amp – Housing and 2 Wire Connectors in order to provide yourself with a seamless connection and female end of the Anderson Plug.
6AM Diode DC For Wireless Controller Kits
24 feet of positive and negative wiring cables for our salt spreader wireless controller kits. Simply wire into your truck battery’s positive and negative posts to the corresponding wires on the 24ft power/ground cable provided and run the other end to the rear of your truck. Then you can plug your salt or sand spreader into the Anderson Plug directly to provide an easy to use wireless remote controls on any Salt or Sand spreader on the market today.
2 Foot External Antenna Extension for external antennas This allows you to add additional strength to your antenna if you don’t have a clear line of site. You may screw these two foot cables together if you need further room. This extender works on all current Control All Wireless remote units with external antennas
Bosch Actuator – Bosch Throttle Actuator for Throttles 1-1/8 Stroke
Large Snow Plow Wireless Remote Transmitter. The Large LT9 transmitter can be used with the straight blade snow plow wireless remote kit. This allows the user with a larger handheld platform. The transmitter has a durable rubber casing and glow in the dark label.
The SB50 Grey Anderson Plug is a 10 gauge kit which comes complete with 2 wire connectors and the plug itself. Please note, Red and Gray connectors do NOT plug in together.
Actuator Throttle Control Relay Kit Relay kit and instructions to operate reverse polarity. Example actuators throttle actuator, reverse direction an smaller motors, hundreds of uses. Commonly used with our 2 function wireless units. Comes with a double relay socket and (2) relays. Note actuator or throttle control not included
Replacement Anderson Plug Covers can be used on sb50 Anderson plugs to keep the wires covered in order to prevent corrosion and damage to the connectors.
The 40/60A sealed relay kit works hand in hand with our wireless remote controller conversion kits for specific applications as needed. the Bueler 40/60A automotive type relay with sealed connections for outdoor use. We have tested many relays and these are the best. Common use for these relays is when you need to use one of our wireless systems to provide higher amperage than our unit can put out, use the relay as a switching device to handle all of your higher amperage needs.
Replace your rubber boot and get a new keyfob for your 8 button wireless transmitter for any of our 8 function wireless remote control kits from Control All Wireless.
This 7 Prong cable Male End will wire into our 600DC Kits and then plug directly into your existing 7 Prong Female End at the back of your truck, trailer, or vehicle. This allows you to quickly mount your tailgate spreader, plug it in, and provide you with 100 feet radius of continuous power so you can control your salt spreader with a wireless controller.
6ft Replacement Power & Ground Cord is a 6′ power / ground cord with Anderson plug and dust cover on one end and two 5/16″ eyelets on the other. Commonly used hand in hand with our wireless controller kits for salt spreaders, but can be used for many applications with our wireless transmitters and wireless receiver kits.
Large 650DC Wireless Transmitter Option. The Large LT9 transmitter can be used with the 650DC Dual electric motor spreader wireless remote kit. This provides the user with a larger handheld platform with larger buttons. The transmitter has a durable rubber casing and glow in the dark label.
Large Gas Spreader Wireless Transmitter . The Large LT9 transmitter can be used with the gas spreader wireless remote kit. This allows the user with a larger handheld platform. The transmitter has a durable rubber casing and glow in the dark label.
Individual Diode for Use With All Control All Wireless Remote Kits – 3 Amp Diode (1 Per)
$2.84 $1.90
The 625DC KIT is a universal salt spreader wireless conversion kit for single motor variable speed control with an extra latching on/off function to operate another apparatus such as vibrate, light, or any aux function. Comes with 24′ power ground wiring, dust caps, sealtite connectors quick connect Anderson plugs and complete instructions.
Extra Large 8 Function Wireless Transmitter Replacement Boot (Rubber Boot Only, Transmitter Sold Separate)
$18.75 $14.25

Showing all 22 results