-
SnowDogg Part # 16160512 – Harness Dust Cap for Lights
SnowDogg Part # 16160512 – Harness Dust Cap for Lights SnowDogg harness cap covers the connector port which attaches to the lights on the side of the plow for your…
-
SnowDogg Part # 16151318 – HT300 10V SA, SB, SC Coil Valves
SnowDogg Part # 16151318 – HT300 10V SA, SB, SC Coil Valve is a coil for your HT300 HPU found on most SnowDogg Plows. This is one of the coils…
-
SnowDogg Part # 16160620 – Snow Plow Controller Dash Mount Kit
SnowDogg Part # 16160620 – Snow Plow Controller Dash Mount Kit is used to mount your SnowDogg plow controller to your truck’s dashboard. You’ll receive the bracket itself, adhesive, and…
-
SnowDogg Part # 16154202 – HD, EX, VX, CM, XP Lift Cylinder Packing Kit 2×6
SnowDogg Part # 16154202 – HD, EX, VX, CM, XP Lift Cylinder Packing Kit 2×6 is the seal kit repair kit for your 16154200 lift cylinder. This kit will include…
-
SnowDogg Part # 16111111 – MD, VMD Plow D2TM Pedal Linkage
SnowDogg Part # 16111111 – MD Plow D2TM Pedal Linkage is also found on other SnowDogg plows such as the VMD v-plow and the MUT series UTV plows. This is…
-
SnowDogg Part # 16111118 – Roll Pin 1/4 x 2 in
SnowDogg Part # 16111118 – Roll Pin 1/4 x 2 in is used on HD, EX, MD, CM, VX, VXF, VMD, TE, and XP plows. This is the roll pin…
-
SnowDogg Part # 16151321 – 90 Degree Swivel Manifold Lift Fitting
SnowDogg Part # 16151321 – 90 Degree Swivel Manifold Lift Fitting is found on the SnowDogg VMD75 plow. This is located on the HPU itself and on the hydraulic manifold…
-
SnowDogg Part # 16152336 – VX/XP Plow S1-S7 Coil With Flying Leads
SnowDogg Part # 16152336 – VX/XP Plow S1-S7 Coil With Flying Leads. This is only used on the XP series and VX series SnowDogg plows. These are the coils used…
-
SnowDogg Part # 16102122 – Clevis Pin Kit With Hardware 7/8 x 4
SnowDogg Part # 16102122 – Clevis Pin Kit With Hardware 7/8 x 4 is used on SnowDogg EX, HD, TE, and CM straight blade snow plows and the VX, VMD, and…
-
SnowDogg Part # 16160742 – H7 Low Beam Bulb Replacement
SnowDogg Part # 16160742 – H7 Low Beam Bulb Replacement is an OEM bulb found on your SnowDogg plow light assembly. You’ll have to unscrew your light housing to get at…
-
SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting
SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting is used on all SnowDogg plows with the HT300 HPU hydraulic units. There are (2) of these used on the…
-
SnowDogg Part # 16151322 – HT300 Cylinder Angle Lift Elbow Port Fitting
SnowDogg Part # 16151322 – HT300 Cylinder Angle Lift Elbow Port Fitting is found on the HT300 HPU only. Specifically, you’ll find it on the manifold block above the pump…