SaltDogg LS11 Pre Wet 12 VDC, Two 160 Gal. Poly Reservoir MDS

SaltDogg LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

Hot

SaltDogg LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

SaltDogg LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

$5,273.40

In stock

$5,273.40

The SaltDogg LS11 pre-wet kit features a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS11H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller. The pre-wet kit comes with two 160 gal polymer reservoirs specially designed to fit next to your SaltDogg spreader. The corrosion-resistant poly is held in place by included stainless steel brackets. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.

SPECIAL ORDER PART

This is a part which isn't stocked on hand and will be a direct factory order. Expect 2-4 weeks additional shipping time and/or delays. due to higher than normal demand.

Availability: Direct Factory Order, Allow Additional Shipping Time (2-4 weeks) SKU: NEW LSII

Description

SaltDogg LS11 Pre-Wet Kit with Two 160-Gallon Reservoirs for Municipal Dump Spreaders

  • Kits contain everything you need to install and run your pre-wet system.
  • Helps salt stick to pavement and melts ice at lower external temperatures.
  • Your choice of electric or hydraulic pump operation.
  • Sturdy poly reservoirs are designed to fit against your SaltDogg MDS Series spreader.
  • 12V DC-powered pump provides variable spray rate.
  • Corrosion-resistant stainless steel brackets, tie downs, and pump enclosures.
LS11 Pre Wet

Buyers Products SaltDogg Pre-Wet Kit for Municipal Dump Spreaders (MDS) enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.

The pre-wet kit comes with two 160 gal polymer reservoirs specially designed to fit next to your SaltDogg spreader. The corrosion-resistant poly is held in place by included stainless steel brackets. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.

The SaltDogg LS11 pre-wet kit features a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS11H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller.

Kits include a reservoir, pump, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

Works with the following spreaders: MDS Series

Product Common Use: SaltDogg MDS Series Municipal Spreaders, Snow and Ice Control

LS11 Pre Wet

SaltDogg LS11 Specifications

Additional information

Weight1000 lbs
Dimensions11 × 11 × 11 in

Reviews

There are no reviews yet.


Be the first to review “SaltDogg LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs”

You've just added this product to the cart: