SaltDogg Part # LS11 - 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

Hot

SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs

$5,228.28

In stock

$5,228.28

SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs.

Buyers Products SaltDogg Pre-Wet Kit for Municipal Dump Spreaders (MDS) enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.

  • Kits contain everything you need to install and run your pre-wet system.
  • Helps salt stick to pavement and melts ice at lower external temperatures.
  • Your choice of electric or hydraulic pump operation.
  • Sturdy poly reservoirs are designed to fit against your SaltDogg MDS Series spreader.
  • 12V DC-powered pump provides variable spray rate.
  • Corrosion-resistant stainless steel brackets, tie downs, and pump enclosures.
  • The pre-wet kit comes with two 160 gal polymer reservoirs specially designed to fit next to your SaltDogg spreader. The corrosion-resistant poly is held in place by included stainless steel brackets. Each kit also includes a pressure sensor to indicate a filter clog or low tank level.
  • The LS11 pre-wet kit features a 12V DC-powered electric diaphragm pump rated at 3 GPM/ 45 PSI. A variable speed in-cab controller allows you to adjust the spray volume. The LS11H features a constant rate hydraulic drive with a proportioning valve rated at 4.5 GPM @ 1750 RPM (150 PSI), plus in-cab controller.
  • Kits include a reservoir, pump, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, and stainless steel brackets and tie downs.

Works with the following spreaders:

     MDS Series

Product Common Use: SaltDogg MDS Series Municipal Spreaders, Snow and Ice Control

SPECIAL ORDER PART

This is a part which isn't stocked on hand and will be a direct factory order. Expect 2-4 weeks additional shipping time and/or delays. due to higher than normal demand.

Availability: Direct Factory Order, Allow Additional Shipping Time (2-4 weeks) SKU: LS11

Description

SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs. Buyers Products SaltDogg Pre-Wet Kit for Municipal Dump Spreaders (MDS) enhances the performance of your salt spreader by adding a liquid ice-melting agent to the salt prior to application. The liquid helps salt stick to surfaces and can melt ice at lower temperatures than salt alone.

Additional information

Weight 101 lbs
Dimensions 40 × 40 × 40 in

Reviews

There are no reviews yet.


Be the first to review “SaltDogg Part # LS11 – 12 VDC Pre-Wet Kit With Two 160-Gallon Poly Side-Mount Reservoirs”

You've just added this product to the cart:

Click to access the login or register cheese