WELCOME TO SNOWPLOWSPLUS
The SnowDogg MD Snow Plow is made up of a few vital components that ensure your snow removal experience is smooth with maximum performance. One of those important and vital components on the SnowDogg MD is the plow HPU. The HPU on the MD snow plow is made up of the HPU itself, gear pump, shaft seal, hydraulic fluid, and more which are specific to the SnowDogg MD snow plow.
-
SnowDogg Part # 16151318 – HT300 10V SA, SB, SC Coil Valves
$20.77SnowDogg Part # 16151318 – HT300 10V SA, SB, SC Coil Valve is a coil for your HT300 HPU found on most SnowDogg Plows. This is one of the coils…
-
SnowDogg Part # 16151312 – HT300 SA Solenoid Drop Valve
$54.11SnowDogg Part # 16151312 – HT300 SA Solenoid Drop Valve is used on generation 1 and generation 2 SnowDogg plows. The SA valve is located on your HPU on the…
-
SnowDogg Part # 16151102 – HT300, HV600 Inlet Strainer With Elbow
$9.98SnowDogg Part # 16151102 – HT300, HV600 Inlet Strainer With Elbow is found on all SnowDogg plows with the HT300 or HV600 HPU hydraulic units. Just about every SnowDogg plow…
-
SnowDogg Part # 16151321 – 90 Degree Swivel Manifold Lift Fitting
$4.08SnowDogg Part # 16151321 – 90 Degree Swivel Manifold Lift Fitting is found on the SnowDogg VMD75 plow. This is located on the HPU itself and on the hydraulic manifold…
-
SnowDogg Part # 16159114 – HT300 Reservoir Seal Kit
$4.27SnowDogg Part # 16159114 – HT300 Reservoir Seal Kit is found on all HT300 reservoirs within your SnowDogg’s HPU. This is the large seal kit which is located at the…
-
SnowDogg Part # 16151322 – HT300 Cylinder Angle Lift Elbow Port Fitting
$4.18SnowDogg Part # 16151322 – HT300 Cylinder Angle Lift Elbow Port Fitting is found on the HT300 HPU only. Specifically, you’ll find it on the manifold block above the pump…
-
SnowDogg Part # 16159116 – HPU Shaft Seal
$4.39SnowDogg Part # 16159116 – HPU Shaft Seal is used on 16151100 HPU pump units for your SnowDogg plows. This shaft seal is located on the pump itself within the…
-
SnowDogg Part # 16159102 – Seal Kit For Part # 16151312, and 16151330
$7.05SnowDogg Part # 16159102 – Seal Kit For Part # 16151312, and 16151330 is found on Gen 1 and Gen 2 SnowDogg plows. This is the seal kit for your…
-
SnowDogg Part # 16151314 – HT300 SB Lift and Angle Valve
$74.10SnowDogg Part # 16151314 – HT300 SB Lift and Angle Valve is used on both the Generation 1 and Gen 2 SnowDogg plows. This is the lift and angle valve…
-
SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting
$2.71SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting is used on all SnowDogg plows with the HT300 HPU hydraulic units. There are (2) of these used on the…
-
SnowDogg Part # 16151302 – HT300 Main Relief Valve
$35.81SnowDogg Part # 16151302 – HT300 Main Relief Valve is used on most SnowDogg plows including the HD, EX, MD, CM plows and more. This is the main relief valve…
-
SnowDogg Part # 16151110 – HT300, HV600 Reservoir Kit
$38.52SnowDogg Part # 16151110 – HT300, HV600 Reservoir Kit is used on most all SnowDogg plows from the HD to the VMD and everything in between. Check your HPU’s model…
