SnowDogg HD EX Plow Parts

SnowDogg HD EX Plow Parts

Buy all of your SnowDogg HD EX Plow Parts from SnowplowsPlus to guarantee the replacement parts you receive are 100% OEM. The HD and EX plows have many of the same parts, except where outlined below. This means, where you see “HD/EX”, “HD-EX” or any other variation of part below, that it will work on either the SnowDogg HD plow lineup or EX plow lineup. We have the entire replacement parts makeup of the SnowDogg HD or EX snow plows including the blade itself, hydraulic parts, electric parts, wiring parts, controller parts, hardware parts and more. SnowDogg HD or EX snow plow parts have never been easier to buy and get shipped fast to your door with SnowplowsPlus and are easy to sort SnowDogg HD or EX plow parts categories broken down by each component including moldboard, HPU, Lift Frame, Accessories, Service Parts, Electrical Parts, and more. With our huge inventory of instock parts, you can trust that if you have a repair to make, we’ll have the SnowDogg HD EX parts to help you make it.

Showing 1–12 of 216 results

  • HD-EX Common Plow Parts

    HD-EX Common Plow Parts

    56 Products
  • HD-EX D2T Lower Lift Frame Parts

    HD-EX D2T Lower Lift Frame Parts

    12 Products
  • HD/EX Electrical & Harness Parts

    HD/EX Electrical & Harness Parts

    24 Products
  • HD/EX HPU Parts

    HD/EX HPU Parts

    34 Products
  • HD/EX Lift Frame Parts

    HD/EX Lift Frame Parts

    32 Products
  • HD/EX LL Frame (pre-2011) Parts

    HD/EX LL Frame (pre-2011) Parts

    14 Products
  • HD/EX Moldboard Parts

    HD/EX Moldboard Parts

    64 Products
  • HD/EX Plow Wing Kit Parts

    HD/EX Plow Wing Kit Parts

    13 Products
  • HD/EX Shock Kit Parts

    HD/EX Shock Kit Parts

    5 Products
  • You've just added this product to the cart:

    SnowDogg Part # 16160512 - Harness Dust Cap for Lights

    SnowDogg Part # 16160512 - Harness Dust Cap for Lights
    SnowDogg Part # 16160512 - Harness Dust Cap for Lights
    0 out of 5

    SnowDogg Part # 16160512 – Harness Dust Cap for Lights

    SnowDogg Part # 16160512 - Harness Dust Cap for Lights SnowDogg harness cap covers the connector port which attaches to the lights on the side of the plow for your SnowDogg snow plow. This is a very common part and is used on almost all SnowDogg plows. You'll find this dust cap on the plow side of your truck. Protect your wiring harness from corrosion and moisture from damaging the pins.

    $8.16
  • You've just added this product to the cart:

    SnowDogg Part # 16160620 - Snow Plow Controller Dash Mount Kit

    0 out of 5

    SnowDogg Part # 16160620 – Snow Plow Controller Dash Mount Kit

    SnowDogg Part # 16160620 - Snow Plow Controller Dash Mount Kit is used to mount your SnowDogg plow controller to your truck's dashboard. You'll receive the bracket itself, adhesive, and 4 screws for installation.
    $21.42
  • You've just added this product to the cart:

    SnowDogg Part # 16160510 - Wiring Harness Weather Protect Plug

    0 out of 5

    SnowDogg Part # 16160510 – Wiring Harness Weather Protect Plug

    SnowDogg Part # 16160510 - Wiring Harness Weather Protect Plug is used on SnowDogg plows to help protect your wiring harness from rain, sleet, and snow in order to help protect against corrosion and damage to your electrical components. This cap will work with wiring harnesses 16160100 and 16160300. 

    $8.16
  • You've just added this product to the cart:

    SnowDogg Part # 16152100 - HT300 Hydraulic Power Unit Plastic Cover for Straight Blade Plow

    16152100
    16152100
    0 out of 5

    SnowDogg Part # 16152100 – HT300 Hydraulic Power Unit Plastic Cover for Straight Blade Plow

    SnowDogg Part # 16152100 - HT300 Hydraulic Power Unit Plastic Cover for Straight Blade Plow. If you have an HT300 power pack HPU, this is the plastic cover for you.  This is placed over the HT300 in order to protect from moisture and corrosion.

    $40.80
  • You've just added this product to the cart:

    SnowDogg Part # 16111124 - 2-1/2 in. Snapper Pin

    0 out of 5

    SnowDogg Part # 16111124 – 2-1/2 in. Snapper Pin

    SnowDogg Part # 16111124 - 2-1/2 in. Snapper Pin is the pin located on the lift frame and linkage assembly on your SnowDogg VMD V Plow. These pins are located on both outside edges of your linkage assembly and are specifically located on your pedal assembly and spring lock on the linkage itself. These are sold as singles, so if you need to replace both sides you'll have to purchase (2) of these.
    $4.08
  • You've just added this product to the cart:

    SnowDogg Part # 16111310 - MD, HD, EX, VX, CM Plow A-Frame Jack

    0 out of 5

    SnowDogg Part # 16111310 – MD, HD, EX, VX, CM Plow A-Frame Jack

    SnowDogg Part # 16111310 - MD, HD, EX, VX, CM Plow A-Frame Jack. This is an OEM jack assembly for your SnowDogg MD, HD, EX, VX, or CM series snow plow. This is the assembly located in between your a-frame assembly and used to hold the plow up when not in use.

    $75.48
  • You've just added this product to the cart:

    SnowDogg Part # 16160402 - Spring Cage Connector, Kit of 2

    0 out of 5

    SnowDogg Part # 16160402 – Spring Cage Connector, Kit of 2

    SnowDogg Part # 16160402 - Spring Cage Connector, Kit of 2 are for your electrical components throughout your SnowDogg Plow. These are found on many of the SnowDogg plows including the XP series, CM plow, MD plows and more.

    $8.16
  • You've just added this product to the cart:

    SnowDogg Part # 16160722 - Snow Plow Headlight Housing Passenger Side

    0 out of 5

    SnowDogg Part # 16160722 – Snow Plow Headlight Housing Passenger Side

    SnowDogg Part # 16160722 - Snow Plow Headlight Housing Passenger Side is used on most all SnowDogg plows, including all full-sized plows like the VXF, VMD, HD, EX, CM, and XP plows. This is the passenger's side plastic housing for your headlight assembly. This housing is found on the back side of your headlight assembly and holds your bulbs and internal wiring in place as well as protects it from the elements.
    $41.53
  • You've just added this product to the cart:

    SnowDogg Part # 16160730 - Plow Light Mounting Hardware Kit (pair)

    0 out of 5

    SnowDogg Part # 16160730 – Plow Light Mounting Hardware Kit (pair)

    SnowDogg Part # 16160730 - Light Hardware Kit (pair) used for one light assembly. If you need new hardware for mounting both the passenger side and driver's side plow lights, you'll need to buy (2) of these kits. This hardware kit is used to hold the headlight assembly to your plow's frame itself.  This is an OEM kit and used on all SnowDogg plows with 16160700 plow lights.

    $15.30
  • You've just added this product to the cart:

    SnowDogg Part # 16160712 - Snow Plow Headlight Housing Driver Side

    0 out of 5

    SnowDogg Part # 16160712 – Snow Plow Headlight Housing Driver Side

    SnowDogg Part # 16160712 - Snow Plow Headlight Housing Driver Side is used on most all SnowDogg plows, including all full-sized plows like the VXF, VMD, HD, EX, CM, and XP plows. This is the driver's side plastic housing for your headlight assembly. This housing is found on the back side of your headlight assembly and holds your bulbs and internal wiring in place as well as protects it from the elements.
    $41.53
  • You've just added this product to the cart:

    SnowDogg Part # 16160110 - Connector Repair Kit for Part # 16160100

    16160110
    16160110
    0 out of 5

    SnowDogg Part # 16160110 – Connector Repair Kit for Part # 16160100

    SnowDogg Part # 16160110 - Connector Repair Kit for Part # 16160100. This is the vehicle side wiring harness repair kit for SnowDogg snow plows. If you have a fray or tear in your wiring harness 16160100, rather than buy a new wiring harness, purchase a repair kit which will solve your problems for half the price.

    $68.82
  • You've just added this product to the cart:

    SnowDogg Part # 16121100 - HD, EX and CM Plow Shoe Assembly

    0 out of 5

    SnowDogg Part # 16121100 – HD, EX and CM Plow Shoe Assembly

    SnowDogg Part # 16121100 - HD, EX and CM Plow Shoe Assembly is for (1) single plow shoe assembly and hardware. If you need to replace or buy both sides for your plow, you'll need to purchase (2) of these kits. This plow shoe will work on both the generation 1 plows such as the SnowDogg HD, EX, and CM straight blade plows, as well as the newer Generation 2 SnowDogg plows such as the HDII and EXII plows.

    $53.71