HD/EX Moldboard Parts

The SnowDogg HD/EX Snow Plow is made up of a few vital components that ensure your snow removal experience is smooth with maximum performance. One of those important and vital components on the SnowDogg HD/EX is the plow moldboard. The moldboard of the HD/EX snow plow are made up of the blade itself, shock kit, trip pin, pivot bolts, and more which are specific to the SnowDogg HD/EX snow plow.

  • SnowDogg Part # 16111310 – MD, HD, EX, VX, CM Plow A-Frame Jack

    0 out of 5

    SnowDogg Part # 16111310 – MD, HD, EX, VX, CM Plow A-Frame Jack. This is an OEM jack assembly for your SnowDogg MD, HD, EX, VX, or CM series snow plow. This is the assembly located in between your a-frame assembly and used to hold the plow up when not in use.

    Earn 7.55 Reward Points
    $75.48
  • SnowDogg Part # 16121100 – HD, EX and CM Plow Shoe Assembly

    0 out of 5

    SnowDogg Part # 16121100 – HD, EX and CM Plow Shoe Assembly is for (1) single plow shoe assembly and hardware. If you need to replace or buy both sides for your plow, you’ll need to purchase (2) of these kits. This plow shoe will work on both the generation 1 plows such as the SnowDogg HD, EX, and CM straight blade plows, as well as the newer Generation 2 SnowDogg plows such as the HDII and EXII plows.

    Earn 5.37 Reward Points
    $53.71
  • SnowDogg Part # 16103020 – MD, HD, EX, CM, VX, TE, XP Plow U-Bolt Kit With Nuts for Lift Chain

    0 out of 5

    SnowDogg Part # 16103020 – MD, HD, EX, CM, VX, TE, XP Plow U-Bolt Kit With Nuts for Lift Chain. This is the u-bolt which is located on your A-frame assembly and holds down the lift chain to the a-frame itself. This kit will include (1) u-bolt and (2) nuts. SnowDogg plows use two of these u-bolt kits on their plows, so if you need to replace both you’ll need to purchase two kits. 

    Earn 0.71 Reward Points
    $7.13
  • SnowDogg Part # 16153110 – Hydraulic Angle Hose 3/8 x 36

    0 out of 5

    SnowDogg Part # 16153110 – Hydraulic Angle Hose 3/8 x 36 is used on MD, HD, and EX straight blade plows. This hose is an OEM hydraulic hose from SnowDogg is 36″ long and has 3/8″ port ends. This is the hose which allows your plow to angle left and right as you press the buttons on your plow’s controller.

    Earn 3.06 Reward Points
    $30.60
  • SnowDogg Part # 16154212 – Packing Kit 1-1/2 in. w/Wiper Seal

    0 out of 5

    SnowDogg Part # 16154212 – Packing Kit 1-1/2 in. w/Wiper Seal is the angle pack kit for your SnowDogg MD snow plow. If you own a SnowDogg MD plow and have a leaky or faulty hydraulic angle cylinder, you may want to try this packing kit before purchasing an all new angle cylinder.

    Earn 3.28 Reward Points
    $32.78
  • SnowDogg Part # 16122100 – Blade Guide Kit Pair

    0 out of 5

    SnowDogg Part # 16122100 – Blade Guide Kit Pair is used on SnowDogg plows such as the MD, HD, EX plows and more. These are OEM and are the original blade guides found on your SnowDogg plow when it rolled off the lot. These are orange in color and you’ll receive (2) blade guide poles, and the hardware needed to install onto your plow.

    Earn 2.55 Reward Points
    $25.50
  • SnowDogg Part # 16103000 – Lift Chain 5/6 Grade 43 Yellow Zinc Chain, 24 Links

    0 out of 5

    SnowDogg Part # 16103000 – 5/16 Grade 43 Yellow Zinc Chain, 24 Links is the chain used on most SnowDogg plows including the MD, HD, EX, VMD, and more. This chain is 5/6″ and has 24 total links. This is the chain which connects to your plow’s lift frame assembly to help lift the plow when you press the raise button on your controller. This yellow zinc lift chain is grade 43 and 32″ in length.

    Earn 1.97 Reward Points
    $19.65
  • SnowDogg Part # 16121158 – MD75 Formed Poly Snow Deflector

    0 out of 5

    SnowDogg Part # 16121158 – MD75 Formed Poly Snow Deflector. This is the plastic poly snow deflector which is installed on the top of your plow’s blade to help keep the snow from blowing over the plow and into your truck’s windshield.

    Earn 16.8 Reward Points
    $168.00
  • SnowDogg Part # 16101100 – HD, EX, XP Plow Trip Pin Kit (Pair)

    0 out of 5

    SnowDogg Part # 16101100 – HD, EX, XP Plow Trip Pin Kit (Pair) is used on the plow blade to hold the blade of the plow to the quadrant lift frame assembly.  This is a complete kit which would replace both sides of the plow. These are OEM SnowDogg parts.

    Earn 5.43 Reward Points
    $54.26
  • SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    0 out of 5

    SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    Earn 11.73 Reward Points
    $117.30
  • SnowDogg Part # 16102142 – Clevis Pin Kit With Hardware 7/8 x 3-1/4 in.

    0 out of 5

    SnowDogg Part # 16102142 – Clevis Pin Kit With Hardware 7/8 x 3-1/4 in. is found on plows such as the SnowDogg HD/EX plows, MD, VX/VXF, VMD, TE, XP, and Skid Steer plows. This pin is used on your chain lift assembly to hold the chin in place to the plow’s frame. 

    Earn 1.39 Reward Points
    $13.85
  • SnowDogg Part # 16111312 – Cap for Plow Jack Stand

    0 out of 5

    SnowDogg Part # 16111312 – Snow Plow Jack Cap is the cap cover for your plow’s jack stand. This is found on SnowDogg CM, MD, HD plows and more. The jack stand is the assembly on your plow with the wheel and handle. 

    Earn 0.6 Reward Points
    $6.00
You've just added this product to the cart: