HD-EX Common Plow Parts

The SnowDogg HD/EX Snow Plow is made up of a few vital components that ensure your snow removal experience is smooth with maximum performance. One of those important and vital components on the SnowDogg HD/EX are all of the common snow plow parts that may need replacing along the way. Common Parts of the HD/EX snow plow are made up of the deflector, plugs, washers, elbows, solenoids, and more which are specific to the SnowDogg HD/EX snow plow.

  • SnowDogg Part # 16121120 – MD, HD, EX, VX, CM Snowplow Plow Shoe Washer (1 Per)

    SnowDogg Part # 16121120 WASHER, PLOW SHOE, MD/HD/EX/VX/CM

    $0.81
  • SnowDogg Part # 16121158 – MD75 Formed Poly Snow Deflector

    SnowDogg Part # 16121158 – MD75 Formed Poly Snow Deflector. This is the plastic poly snow deflector which is installed on the top of your plow’s blade to help keep the snow from blowing over the plow and into your truck’s windshield.

    $168.00
  • SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    $117.30
  • SnowDogg Part # 16120160 – EX85 Poly Snow Deflector

    SnowDogg Part # 16120160 – EX85 Poly Snow Deflector is used on both the generation 1 and newer generation 2 SnowDogg EX85/EXII85 plows. This is the plastic poly snow deflector which is installed on the top of your plow’s blade to help keep the snow from blowing over the plow and into your truck’s windshield. SnowDogg also makes a rubber snow deflector which is more commonly used on plows and we sell that as well.

    $188.81
  • SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting

    SnowDogg Part # 16151324 – HT300 Manifold Angle Port Fitting is used on all SnowDogg plows with the HT300 HPU hydraulic units. There are (2) of these used on the Hydraulic Manifold assembly, with both on the side wall towards the bottom of the sidewall itself.

    $8.16
  • SnowDogg Part # 16120162 – EX90 Formed Poly Snow Deflector

    SnowDogg Part # 16120162 – EX90 Formed Poly Snow Deflector is found on the SnowDogg EX90 and EXII90 generation 1 and generation 2 plows. This is the formed poly snow deflector installed on the top of your plow blade to help keep the snow down and from blowing over the top of your plow into your truck’s windshield. SnowDogg also makes a rubber deflector for the EX90 which we also sell.

    $199.22
  • SnowDogg Part # 16120158 – HD80, TE80, EX80 Poly Deflector

    SnowDogg Part # 16120158 – HD80, TE80, EX80 Poly Deflector is used on both the generation 1 and newer generation 2 SnowDogg straight blade plows at 8 ft in length. This is the poly formed snow deflector, not to be confused with the standard rubber snow deflector commonly found on most snow plows. This is an OEM deflector manufactured by SnowDogg. When installed, this snow deflector will help keep the snow down and from blowing over the top of your blade and into your truck’s windshield which could obstruct your view.

    $168.00
  • SnowDogg Part # 16120630 – 8.5 ft. Cutting Edge for EX85 Plow 102 x 6 x .50 in

    SnowDogg Part # 16120630 – 8.5 ft. Cutting Edge for EX85 Plow 102 x 6 x .50 in is used on the SnowDogg EX85 snow plow. This is the 1/2″ thick version of the cutting edge, SnowDogg’s thickest. This is an OEM cutting edge from SnowDogg. Don’t trust those aftermarket one’s floating around online as you’ll just end up replacing it sooner than you would with the SnowDogg OEM cutting edges. This cutting edge is 102″ long and 6″ in width.

    $238.98
  • SnowDogg Part # 16120610 – 7.5 Ft. Cutting Edge 90 x 6 x 1/2 in. for MD, HD, TE, EX75

    SnowDogg Part # 16120610 – 7.5 Ft. Cutting Edge 90 x 6 x 1/2 in. for MD, HD, TE, EX75. This cutting edge is an OEM (original manufacturer is SnowDogg) cutting edge for your SnowDogg HD75, EX75, MD75, TE75, or SKTE75 snow plow. This is a straight edge cutting edge that is used with all straight blade 7.5″ plows from SnowDogg specifically. This is the 1/2″ thick version of the cutting edge with carbon steel material and a powder coat finish. The cutting edge is 90″ in length, 6″ wide, and 1/2″ thick. 

    $201.39
  • SnowDogg Part # 16120520 – MD, HD, TE, EX75 Cutting Edge 90 x 6 x .375 in.

    SnowDogg Part # 16120520 – MD, HD, TE, EX75 Cutting Edge 90 x 6 x .375 in. is used on 7.5ft straight blade plows from SnowDogg. This is the cutting edge needed for your straight blade, commonly replaced as your cutting edge begins to wear and your plow passes begin to fade. This is the 3/8″ version of the cutting edge assembly.  Don’t buy an aftermarket cutting edge like most that are out there. Buy one from us and trust that all of our parts are directly from SnowDogg, and thus back you with the SnowDogg warranty.

    $164.10
  • SnowDogg Part # 16120620 – 8ft Cutting Edge for HD80, EX80, MD80, and TE80 Plows 96 x 6 x .50 in

    SnowDogg Part # 16120620 – 8ft Cutting Edge for HD80, EX80, MD80, and TE80 Plows 96 x 6 x .50 in. This is the cutting edge you need if you own a 8ft straight blade snow plow from SnowDogg. As you begin to use your plow, over time the cutting edge will begin to wear, as it is designed to do. Once you notice a decline in the overall effectiveness of each plow pass, it’s time to replace the cutting edge with a new one. This is an OEM cutting edge and is specifically made for SnowDogg 8 ft straight blade plows. This is the 1/2″ thick version of the cutting edge.

    $207.96
  • SnowDogg Part # 16221652 – EX Plow Wing Frame Weldment Passenger Side

    SnowDogg Part # 16221652 FRAME WELDMENT,PASSENGER’S SIDE,EX WING

    $439.68
You've just added this product to the cart: