Boss Salt Spreader Parts are verified OEM and direct from Boss Plows. Overall, Boss Salt Spreaders are taking the snow removal and ice management industry by storm, no pun intended. Their tailgate salt spreaders like the TGS800 Tailgate Spreader or the TGS300 Tailgate Spreader, are designed in a way that puts the operator first. For example, most tailgate spreaders obstruct at least a small portion of your view while driving. Boss has made sure that their tailgate spreaders don’t obstruct your rear viewing in any manner shape or form. The VBX salt and sand spreaders take ice management to a whole new level. Expand your business reach with a VBX spreader and take on large parking lots and commercial buildings with ease. If at anytime your Boss salt spreader breaks down or simply needs a tune up, look no further than SnowplowsPlus for all of your Boss Salt Spreader Parts needs.
Boss Walk-Behind Spreader Parts
Boss Hopper Spreader Parts
Boss Tailgate Spreader Parts
Boss Salt Spreader Vibrator Kits
Boss Part # HDW14016 – 5/16-18 Threaded Knob$8.53
Boss Part # HDW14016 – 5/16-18 Threaded Knob is an OEM knob found on the Boss VBX8000 and VBX9000 hopper salt spreaders. This is the knob used on your height adjusting assembly for your chute assembly found at the back of your VBX spreader. This is sold as a single-threaded knob, but there are (2) located on the spreader. If you need to replace both knobs, you’ll need to purchase (2) total.
Boss Part # HDW17303 – Tuflok Rivet$0.86
Boss Part # HDW17303 – Tuflok Rivet is used on the older Boss plows and the manifold assembly. This is the rivet which helps hold your cover in place on the lift frame assembly. You’ll find multiple HDW17303 on your plow and they are sold as single rivets here. If you need more, simply increase the quantity needed.
Boss Part # MSC04238 – SmartHitch2 Switch Boot$4.96
Boss Part # MSC04238 – SmartHitch2 Switch Boot is the rubber cover which goes over your Smarthitch2 toggle switch located on your plow’s lift frame assembly. Over time, this rubber boot can begin to wear or tear. Pick up a new OEM Boss toggle switch boot here. This is the rubber boot cover for the toggle switch only. This will not include the actual toggle switch itself.
Boss Part # TGS05898 – Rotary Actuator HS Motor – Boss Spreader Motor$509.80
Boss Part # TGS05898 – Rotary Actuator HS Motor – Boss Spreader Motor is found on Boss tailgate spreaders such as the TGS 800 and box spreaders such as the VBX8000. On the VBX series of hopper spreaders, this motor is used as the spinner motor back by your chute assembly. On Boss tailgate spreaders, you’ll find this actuator motor below the spinner assembly and attached to the spinner rod. This is an OEM actuator from Boss.
Boss Part # VBS14037 – VBX8000, VBX9000 Spreader Spinner Front Rod Assembly$23.27
Boss Part # VBS14037 – VBX Spreader Spinner Front Rod Assembly is for the Boss VBX8000 hopper spreader. Specifically, this rod is located within the spinner assembly, located under the spinner itself. This is an OEM front rod for your VBX8000 spinner and manufactured by Boss.
Boss Part # TGS05809 – Shaft Seal Double Lip .75 x 1.125 x .313 in.$7.89
Boss Part # TGS05809 – Shaft Seal Double Lip .75 x 1.125 x .313 in. is found on Boss tailgate spreaders such as the Boss TGS 300, TGS 600 and more. This is the shaft seal located on your spinner shaft itself, directly above your spinner shaft motor assembly.
Boss Part # TGS05892 – Rotary Actuator Shaft 3/4 in. Diameter$31.43
Boss Part # TGS05892 – Rotary Actuator Shaft 3/4 in. Diameter is specifically found on Boss TGS1100 spreaders with SmartHitch (only if serial # is TG10126 or higher), all TGS 600 tailgate spreaders, and all new TGS 1100 non/SmartHitch. This is the shaft which connects directly to your spreader’s actuator motor at the bottom of your spinner assembly.