Western Tornado Spreader (1.25yd) Drive Components including conveyor belt parts, controller and harness parts, chute parts and more. Western Tornado Spreader drive component parts are thought of as the most important to a properly functioning salter because the entire component is responsible for controlling the deicing material such as your bulk salt from flowing properly through each component on the Western Tornado spreader. Moving parts within the drive components found on your Western Tornado spreader are just as important as any other system, if not more due to all the things that could go wrong. Even minor issues within the drive components can cause major inefficiencies with the operation of your spreader. Buy pulleys, chute parts, spinner parts and more to keep your Tornado from performing at an optimal level throughout the winter.
-
Western SnowEx Part # 68662 – 5/8 in. 4-Bolt Flange Bearing for Spreaders
Western SnowEx Part # 68662 – 5/8 in. 4-Bolt Flange Bearing is found on multiple Western salt spreaders and SnowEx spreaders. Specifically, the flange bearing is normally found on the…
-
Western SnowEx Part # 94536 – Bearing 1‑1/8 in. ID 2 Bolt Flange for Striker, Tornado, Poly Hopper Spreaders
Western SnowEx Part # 94536 – Bearing 1‑1/8 in. ID 2 Bolt Flange for Striker, Tornado, Poly Hopper Spreaders. These are also commonly found on the SnowEx in bed hopper…
-
Western Part # 78075 – 60 Link 63″ #40 Roller Chain, 29.5 in. Long for Tornado Spreader Conveyor
Western Part # 78075 – 60 Link 63″ #40 Roller Chain, 29.5 in. Long for Tornado Spreader Conveyor is the complete chain, with master link, used to replace your Western…
-
Western Part # 95777 – Sprocket #40 x 11T x .625 ID
Western Part # 95777 – Sprocket #40 x 11T x .625 ID is used on the Western Tornado spreaders. This sprocket is found on the motor assembly within your spreader….
-
Western Part # 95894 – #40 Chain Master Link
Western Part # 95894 – #40 Chain Master Link is found on the older Western Ice Breaker spreaders, Western Tornado spreaders, and Western Striker spreaders.
-
Western SnowEx Part # 78102 – Poly Hopper II Spreader Dual Control Controller
Western SnowEx Part # 78102 – Poly Hopper II Spreader Dual Control Controller is a New Dual-Speed Control for the Poly Western Tornado, Fisher Poly-caster, and Blizzard Ice-Chaser in-bed salter. The control is 78102….
-
Western SnowEx Part # 78178-1 – Poly Hopper II Module Box Dual Motor Spreaders
Western SnowEx Part # 78178-1 – Poly Hopper II Module box is for the inbed spreaders from Western such as the Western Tornado. Found on the 1.25, 1.5, 1.8, and…
-
Western SnowEx Part # 78067 – Tornado and Poly Hopper II Spreader Spinner Shaft
Western SnowEx Part # 78067 – Tornado and Poly Hopper II Spreader Spinner Shaft. This is the long metal shaft that runs from the spinner itself to the motor assembly…
-
Western SnowEx Part # 78300 – 12 Volt DC 1/3 HP Motor Includes 93101
Western SnowEx Part # 78300 – 12 Volt DC 1/3 HP Motor Includes 93101. This motor is for a 12V vehicle. It is bi-directional and has a 1/2″ flat shaft like…
-
Western SnowEx Part # 78103 – Wiring Module to Motor Poly Hopper II Spreader
Western SnowEx Part # 78103 – Wiring Module to Motor Poly Hopper II Spreader is used by Western for the non -1 Tornado spreaders and both the -1 and non…
-
Western Part # 91897 – 3/32 x 1/2 in. Cotter Pin
Western Part # 91897 – 3/32 x 1/2 in. Cotter Pin is commonly found on the Western Tornado spreader as well as the older Western Ice Breaker salt spreaders. This…
-
Western Spreader Part # 29247 – Tornado Spreader Cab Control
Western Plow Part #29247 – CAB CONTROL – TORNADO