Boss Part # MSC19050 – SmartLight2 to SmartLight3 L.E.D. with Ice Shield Technology Upgrade Kit

Description

Boss Part # MSC19050 – SmartLight2 to SmartLight3 L.E.D. with Ice Shield Technology Upgrade Kit. This is the kit you’d need if you have the SL2 headlights on your plow, which are the oval halogen style headlights, and you want to upgrade to the newest LED plow lights. With this kit, you’ll receive the MSC16200 headlight kit, MSC09417 control harness 13-pin plow side, and HDW09418 hardware kit for mounting your new lights. If you have a 2003-2014 Dodge Ram, you’ll also need to purchase a MSC19053 adapter sold separately. These are the newest Boss SL3 100% LED headlights.

The SL3 Headlights will use the same mounting arrangement as the current SL2’s. There are some important points to be aware of when installing the SL3 Headlights.

• During the installation process, DO NOT use thread locker on the ¼”-20 bolts.
• Torque the ¼”-20 bolts to no more than 6 ft-lbs.
• SL3 Headlights are high output and DOT compliant, therefore proper aiming of the lights is very important. Please refer to either the owner’s manual or installation manual for proper aiming instructions.

The SL3 Headlights are equipped with Ice Shield Technology. Ice Shield Technology is a state of the art means of defeating ice buildup on the headlight lenses. Ice Shield Technology incorporates a conductive grid into the lens of the light, which is activated when the ambient air temperature inside the light falls below 77 ℉. Once turned on, the system will remain active until the vehicle is turned off.

Additional information