Boss Part # MSC09601 – Handheld Controller Smarttouch2 Power V Control

Description

Boss Part # MSC09601 – Handheld Controller Smarttouch2 Power V Control will work on all Boss V Plows including the VXT and DXT series of plows. This is a direct replacement for the older Boss V Plow controllers, MSC04544, and plugs in place of it directly. This will work on RT2 V Plows, RT3 V Plows with Smart Hitch and RT3 V Plows with Smart Hitch II.

This controller has the following functions:

• ON/OFF: Push the ON/OFF switch to the left ON position to turn the control on. Green LED indicators will light up on the control. Push the ON/OFF switch to the right OFF position to turn the control off.
• RAISE: To raise the blade of the plow, quickly press the center button upward twice. You can also press and hold the center button upward until the blade is fully raised.
• LOWER: To lower the blade of the plow, quickly push the center button downward twice. You can also press and hold the center button downward until the blade is fully lowered.
• FLOAT: The plow will automatically activate the FLOAT feature when the center button is quickly pressed downward twice. (The center LED indicator will turn RED). You can also press and hold the center button downward for 2 seconds. (The center LED indicator will turn RED). Press the raise button to turn the FLOAT function off.
• “What Is FLOAT?”: The FLOAT feature allows the plow blade to follow the contour of the ground. Press the raise button to turn FLOAT function off.
• Note: The control MUST be in FLOAT to use SmartHitch2TM to attach or detach the snowplow.
• ANGLE LEFT: To plow snow to the left, press and hold the left wing out and left wing in buttons simultaneously until the blades are fully angled.
• ANGLE RIGHT: To plow snow to the right, press and hold the right wing out and right wing in buttons simultaneously until the blades are fully angled.
• VEE: To create the Vee shape with the plow blades, press both the left wing in and right wing in buttons simultaneously until the blades are fully retracted.
• SCOOP: To create the Scoop shape with the plow, press both the left wing out and right wing out buttons simultaneously until the blades are fully extended.
• Note: The control should be turned off when not in use. It can then be unplugged and stored.
• SLEEP mode: If the controller is ON but not used for 20 minutes, the automatic SLEEP mode will be activated. The controller LED lights will flash green and red when the controller is in SLEEP mode. Turn the controller OFF to deactivate SLEEP mode.

Additional information