Western Drop 600 Stainless Steel Tailgate Spreader

Match material delivery rate to the precise conditions with enhanced speed control with a single variable-speed control knob that controls material flow rate.

A detachable 2″ receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2″ hitch receiver with sufficient payload capacity for the selected spreader.

The spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This type of installation reduces stress on the equipment since the weight is positioned over the rear wheel as opposed to behind them and allows for additional versatility to maneuver in tight spaces.

A 36″ spread width makes applications on sidewalks and walking paths easy. The WESTERN drop spreaders can treat these surfaces with one or two passes and limit damage to the grass or sensitive surfaces right next to the path. The spread width can be limited to 30″ by activating 3″ baffles on either side of the trough.

The salt is protected by a custom-molded polyethylene lid that is secured by rubber straps.

A stainless steel hatch screen helps break up de-icing material to prevent bridging and clogs during operation. A hinged bag splitter that easily pulls up to open bagged rock salt for easy loading. When not in use, the bag splitter can be folded down and out of the way.

The new Drop 250 and 600 are constructed of laser-cut stainless steel and high strength rivets. The oil filled poly bearings provide a long, maintenance-free service life.

The material delivery system has finger-like appendages that agitate the surrounding material with every revolution. This ensures a consistent amount of material flows into the spreader trough and, at the same time, keeps it from bridging.

The entire trough drops open for easy and fast material clean-out when the job is done. This allows you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job.

The 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch. This style of attachment is common on tractors but can also be found on some other types of equipment as well.

A detachable 2″ receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2″ hitch receiver with sufficient payload capacity for the selected spreader.

The spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This type of installation reduces stress on the equipment since the weight is positioned over the rear wheel as opposed to behind them and allows for additional versatility to maneuver in tight spaces.

Make sure you’re seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you’re seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.

PART NUMBER – #91815 – For DROP 600

See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.

PART NUMBER – #91820 – For DROP 600

1.5 and 2.0 cu ft extension collars are available as an accessory to increase material capacity for UTVs that can handle the additional weight.

PART NUMBER – #91810 – 6.0 cu ft Model Expands to 8.0 cu ft

Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.

PART NUMBER – 91835 – For DROP 600

Keep your UTV spreader control protected from the elements with the UTV Spreader Control Shield. A molded, plastic “visor” attaches to the top of the UTV spreader control to protect it from the rain or snow.

PART NUMBER – 78585 – For DROP 600

Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware.

PART NUMBER – 82018 – For DROP 600