SnowDogg Cutting Edge Parts

SnowDogg Cutting Edge Parts

SnowDogg Cutting Edge Parts can be bought from SnowplowsPlus and shipped to your business to help you replace your cutting edge on your SnowDogg plow and get a clean cut again with each and every pass just like you did on the day you rolled it off the lot. SnowplowsPlus carries all of the cutting edges, replacement cutting edge bolts and nuts available at low prices for all SnowDogg snow plows from the XP810 to the MD series and everything in between. SnowDogg Cutting Edge kits will need to replaced throughout the life of your plow as it is considered a wear part. Cutting edges will wear over time as they scrape the roads and driveways you plow. Trust SnowplowsPlus with your cutting edge purchases to ensure you get the right one for your exact plow the first time. If you can’t locate the specific part you’re looking for, feel free to reach out at anytime.

  • SnowDogg Part # 16111124 – 2-1/2 in. Snapper Pin

    0 out of 5

    SnowDogg Part # 16111124 – 2-1/2 in. Snapper Pin is the pin located on the lift frame and linkage assembly on your SnowDogg VMD V Plow. These pins are located on both outside edges of your linkage assembly and are specifically located on your pedal assembly and spring lock on the linkage itself. These are sold as singles, so if you need to replace both sides you’ll have to purchase (2) of these.

    Earn 0.41 Reward Points
    $4.08
  • SnowDogg Part # 16111118 – Roll Pin 1/4 x 2 in

    0 out of 5

    SnowDogg Part # 16111118 – Roll Pin 1/4 x 2 in is used on HD, EX, MD, CM, VX, VXF, VMD, TE, and XP plows. This is the roll pin found on your linkage assembly on the plow by the spring assembly which locks your plow to your truck when in use. You’ll need to buy (2) of these if you need both sides, as there are (2) found on each plow.

    Earn 0.31 Reward Points
    $3.06
  • SnowDogg Part # 16111120 – Pedal and Jack Snapper Pin

    0 out of 5

    SnowDogg Part # 16111120 – Pedal and Jack Snapper Pin is found on most SnowDogg straight blade plows such as the CM, MD, EX, HD, and XP plows. This is the pin which is located on your linkage assembly on the outsides of your pedal and jack spring assembly. 

    Earn 0.41 Reward Points
    $4.08
  • SnowDogg Part # 16101170 – VX Plow Hinge Pin Kit With Washer and Cotter

    0 out of 5

    SnowDogg Part # 16101170 – VX Plow Hinge Pin Kit With Washer and Cotter. This is the pin which is found between each half of your SnowDogg VXF V Plow blade. The pin goes through each side of the plow blades in order to hold them together, while allowing the blade halves to rotate as normal. The pin kit inclues the large hinge pin itself , washer, and cotter pin. This is only used on the VXF v plows and not used on the VMD version.

    Earn 3.58 Reward Points
    $35.83
  • SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    0 out of 5

    SnowDogg Part # 16124020 – MD, HD, EX Plow 7.5ft Back Draft Edge

    Earn 11.73 Reward Points
    $117.30
  • SnowDogg Part # 16120850 – VX Passenger Side Center Cutting Edge 11.18 x 6 x .50 in

    0 out of 5

    SnowDogg Part # 16120850 – VX Passenger Side Center Cutting Edge 11.18 x 6 x .50 in is used on the VX85 and VX95 SnowDogg v plows. On your VXF plow, you’ll find (4) separate parts which make up the cutting edge. This is the smaller portion of the cutting edge located on the passenger’s side and in the center of your plow. This formed steel cutting edge is an OEM part from SnowDogg directly.

    Earn 7.32 Reward Points
    $73.17
  • SnowDogg Part # 16120840 – VX Drivers Side Center Cutting Edge 11.18x 6.0 x .500in

    0 out of 5

    SnowDogg Part # 16120840 – VX Drivers Side Center Cutting Edge 11.18x 6.0 x .500 in. is used on the VX85 and VX95 SnowDogg v plows. On your VXF plow, you’ll find (4) separate parts which make up the cutting edge. This is the smaller portion of the cutting edge located on the driver’s side and in the center of your plow. This formed steel cutting edge is an OEM part from SnowDogg directly.

    Earn 7.32 Reward Points
    $73.17
  • SnowDogg Part # 16120820 – VX85 Cutting Edge 46 x 6 x 1/2 in.

    0 out of 5

    SnowDogg Part # 16120820 – VX85 Cutting Edge 46 x 6 x 1/2 in. is only used on the VX/VXF85 8.5  ft. V-Plow from SnowDogg. This is one half of the cutting edge assembly. You more than likely will need both sides, in which you’d need to purchase (2) of these parts. This cutting edge can be used on either the passenger side of your plow’s blade or the driver’s side. 

    Earn 16.37 Reward Points
    $163.67
  • SnowDogg Part # 16120630 – 8.5 ft. Cutting Edge for EX85 Plow 102 x 6 x .50 in

    0 out of 5

    SnowDogg Part # 16120630 – 8.5 ft. Cutting Edge for EX85 Plow 102 x 6 x .50 in is used on the SnowDogg EX85 snow plow. This is the 1/2″ thick version of the cutting edge, SnowDogg’s thickest. This is an OEM cutting edge from SnowDogg. Don’t trust those aftermarket one’s floating around online as you’ll just end up replacing it sooner than you would with the SnowDogg OEM cutting edges. This cutting edge is 102″ long and 6″ in width.

    Earn 23.9 Reward Points
    $238.98
  • SnowDogg Part # 16120920 – Center Cutting Edge for XP810 Plow 90 x 6 x .50 in

    0 out of 5

    SnowDogg Part # 16120920 – Center Cutting Edge for XP810 Plow 90 x 6 x .50 in. On your SnowDogg XP810 hydraulically winged snow plow, the cutting edge is made up of (3) separate pieces. There is one cutting edge per wing, and then this center cutting edge which is the longest portion of the cutting edge assembly. This portion is 90″ in length and 1/2″ thick.

    Earn 18.46 Reward Points
    $184.62
  • SnowDogg Part # 16120520 – 7.6ft MD Plow Cutting Edge 3/8in Thick

    0 out of 5

    SnowDogg Part # 1620520 7’6″ Cutting edge 3/98″ thick MD

    Earn 14.5 Reward Points
    $145.00
  • SnowDogg Part # 16360472 – Rubber Cutting Edge 1.5x10x120in

    0 out of 5

    SnowDogg Part # 16360472 RUBBER CUTTING EDGE,1.5inX 10in X 120in

    Earn 88.12 Reward Points
    $881.22
You've just added this product to the cart: