SaltDogg 6-16 Cubic Yard Hydraulic Conveyor Chain Spreader

SaltDogg 6-16 Cubic Yard Hydraulic Conveyor Chain Spreader

• Designed for dump bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight).
• Available with 108 in., 120 in., 144 in., or 168 in. hoppers with a capacity from 6 to 16 cubic yards.
• Hydraulic power with two independent motors for conveyor and spinner operation. Your choice of three gearbox ratios.
• Spreads bulk salt, bulk sand, and salt/sand mix.
• Hydraulic spreader controls sold separately with variety of options available.
• 18 in. poly spinner broadcasts up to 30 ft, using with a height adjustable chute.
• Versatile 24 in. wide chain conveyor drive.
• Stainless steel, adjustable inverted V reduces stress on the drive line and improves flow.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Heavy duty 3/8 in. hinged top screens with 2-1/2 in. openings.
• Spreader is shown with optional light bar (8891167) , and pre-wet system (LS4) which are sold separately.
• Made in the USA.

Buyers Products SaltDogg 6-16 Cubic Yard Hydraulic Conveyor Chain Spreader gives municipalities and large contractors a high-volume, heavy duty spreader ready for use with a truck’s existing central hydraulic system. The 108 in., 120 in., 144 in., or 168 in. hoppers are designed for 96 in. wide dump bodies and flatbeds with a minimum 26,000 lb GVW (gross vehicle weight) chassis. The spreader is equipped with a high-flow steel pintle chain conveyor and a stainless steel inverted V to reduce stress on the drive line and improve flow. The conveyor is 24-1/2 in. wide with 3/8 in. crossbars, and has a stainless steel floor. A screw jack adjustable feed gate offers additional material flow control.

The conveyor is driven by a hydraulic motor with your choice of a 25:1 or 50:1 worm gear box, or a 6:1 spur gear box. The spinner is powered by a direct mount hydraulic motor. The spreader features a heavy duty driveline, including a 2 in. drive shaft and bearings with 8-tooth sprockets and a 1-1/2 in. spring loaded idler shaft and bearings with 8-tooth sprockets.

The spreader comes with a 20 in. poly spinner or an optional stainless steel spinner and can cast material 2 to 40 ft. The baffles and spinner chute height are adjustable to fit your application. The chute and spinner assembly flips up or detaches completely for convenient bulk unload, easy servicing, and access to towing.

A SaltDogg stainless spreader is an investment made to last. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The hopper also comes outfitted with six 3/8 in. heavy duty hinged-top screens with 2-1/2 in. openings. . It’s the perfect heavy duty, under-tailgate spreader that can handle 3/8 in. gravel in addition to bulk salt and salt/sand mixes.

Spreader is shown with optional light bar (8891167) , and pre-wet system (LS4) which are sold separately.

Hydraulic spreader controls are sold separately. A variety of options are available, including manual hydraulic, manual with load sensing, and electric over hydraulic, available with or without GPS. See Related Products below.

Product Common Use: Snow and Ice Control, Road and Highway Maintenance