SnowDogg Part # 16071140 – Universal Headlight Adapter HB2, 2B, 2D

Description

SnowDogg Part # 16071140 – Universal Headlight Adapter HB2, 2B, 2D is used to allow your vehicle headlights to switch to the plow when in use and switch back to the truck when you’re done with your plow for the night. This is only used on the HB2/2B/2D sealed beam headlights. Check your truck’s headlight bulb type before purchasing or installation.

INSTRUCTIONS

1. Disconnect both PS and DS side truck headlights from the truck harness.

2. Connect the 16071140 adapters to the OEM headlight connectors and truck harness connectors.

3. Connect the 16071140 adapters to the universal light harness connectors included with the snowplow. This is part of the harness with the relay module.

4. Use an included Tap connector to tap the PURPLE or ORANGE wire into the TURN light circuit on both the PS and DS circuits.

NOTE:

IF the truck is a SWITCHED GROUND INSTALL – skip step 5 and go to the special instructions (on back page).

5. Use an included Tap connector to tap the BROWN wire into your PARK light circuit on both the PS and DS circuits.

6. Check all light functionality before operating the plow.

NOTE:

2008 Ford SuperDuty trucks built before April 18, 2007 were originally shipped with a miscalibrated Smart Junction Box that would malfunction when switching to plow lights.

From Ford SVE Bulletin Q-155-R1

On 04/23/07, customers may have their Ford dealer reprogram the Smart Junction Box (SJB) with a new calibration using Technical Service Bulletin TSB 07-09-01. After reprogramming no other operator intervention is required. New vehicles from KTP with “Snowplow Prep Package Option” (Order Code 473), or “Snowplow/Camper Prep Option”, and with a build date of 4/18/07 or later, already have this new calibration included.

NOTE:

Relay-driven functions such as the Ford high-beams or park-lamps are not monitored by SJB control strategy. Therefore, if required prior to applying the TSB, the snowplow can still be used because of the SJB will not affect snowplow headlamp operations with the Ford headlamp switch in either the “OFF” position, or “ON” in park lamp position, or “ON” with high-beams activated.

Additional information